சிவில் மற்றும் சுற்றுச்சூழல் பொறியியல் இதழ்

Experimental Study on Concrete Using Copper Slag as Replacement Material of Fine Aggregate

Abstract

Tamil Selvi P, Lakshmi Narayani P and Ramya G

This paper reports the effect of concrete using copper slag as fine aggregate replacement. In this project work, the concrete grade M40 was selected and IS method was used for mix design. The properties of material for cement, fine aggregate, coarse aggregate and copper slag were studied for mix design. The various strength of concrete like compressive, flexural and split tensile were studied and non-destructive test such as rebound hammer test and ultrasonic pulse velocity measurement were studied for various replacements of fine aggregate using copper slag that are 0%, 20%, 40%, 60%, 80% and 100%. The maximum compressive strength of concrete attained at 40% replacement of fine aggregate at 7 and 28 days. The split tensile strength and the flexural strength were also obtained higher strength at 40% replacement level at 28 days. The rebound hammer test showed higher compressive strength at 40% fine aggregate replacement, this is due to uniformity of concrete. The pulse wave velocity is higher for the 40% fine aggregate replacement, it is understood that the density of the mix is high and free from pores.